Essaie de dessiner ton modèle sur une feuille de papier quadrillé avec un carreau pour une unité. Le couple (0,0) correspond au point GPS où on se trouveMoving Map User Defined Pointers
There are 3 user pointers which can be selected on the Moving Map tab in Configuration.
If Selecting User 1 the pointer will be read from a file called userPointer1.dat
User 2 from userPointer2.dat
User 2 from userPointer3.dat
OziExplorer reads the pointer from the file when moving map is started.
The drawing consists of a set of points which have lines drawn between them.
There is a limit on the size of the drawing, if it is too big it will be clipped when drawn onto the map. Use the example below as a for the size.
This is an example of a file (userPointer1.dat) which draws an aeroplane
;moving map user pointer
;aeroplane
;lines starting with ; are treated as comments and not read
;empty lines are not read
;file consists of a set of x,y coordinates - 1 set per line
;a maximum of 100 points
;whole numbers only
;the 0,0 coordinate is plotted at the GPS position
;OziExplorer loads this file when it starts moving map
0,0
3,3
3,7
15,7
15,11
3,13
1,22
5,22
5,26
0,27
0,24
0,27
-5,26
-5,22
-1,22
-3,13
-15,11
-15,7
-3,7
-3,3
0,0
Voici un aperçu de ce pointeur0,0
5,4
1,4
1,6
6,6
6,12
1,12
1,11
5,11
5,7
1,7
1,14
-1,14
-1,12
-6,12
-6,10
-5,10
-5,11
-1,11
-1,7
-5,7
-5,8
-4,8
-4,9
-6,9
-6,6
-1,6
-1,4
-5,4
0,0
Merci Michelvoyageur78s a écrit :Je vais effectivement remonter la remarque à Des.